TM 5-3805-254-20-2
POWER DIVIDER HOSES, TUBES, AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind instrument panel to prevent breaking or disconnecting wires. NOTE
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1
Power divider control
Tube (3)
Tag.
valve (1) to cab
floor adapter (2)
2
Elbow (4)
Line nut (5)
Using 9/16-inch open-end wrench, unscrew, and
take off.
3
Power divider control
Elbow (4)
Using 9/16-inch open-end wrench, unscrew, and
valve (1)
take off.
4
Cab floor adapter (2)
Line nut (6), tube
a Using 9/16-inch open-end wrench, unscrew, and
(3), and elbow (7)
take off.
b Take out tube.
5
Elbow (8)
Tube (9)
Tag.
6
Line nut (10)
Using 9/16-inch open-end wrench, unscrew, and
take off.
7
Cab floor adapter (2)
Elbow (8)
Using 9/16-inch open-end wrench, unscrew, and
take off.
8
Cab floor (11)
Nut (12), washer
a Using 1-inch open-end wrench, unscrew, and
(13), cab floor
take off.
adapter (2), and
b Get rid of lockwasher.
lockwasher (14)
Change 1 2-946.2
