TM 5-3805-254-20-2
POWER DIVIDER HOSES, TUBES, AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
26
Power divider (1)
Elbow (2)
Screw on and tighten using 9/16-inch open-end
wrench.
27
Elbow (2)
Hose (3)
Put in place.
28
Line nut (4)
Screw on and tighten using 9/16-inch open-end
wrench.
29
Four clamps (5)
Tube (6)
Put on.
30
Frame crossmember (7)
Two extension clips
Screw on and tighten using two 3/4-inch box-end
(8), nuts (9), and
wrenches.
screws (10)
31
Tube (6)
Two clamps (11)
Put on.
32
Two extension clips
Two clamps (11), nuts
Screw on and tighten using two 7/16-inch box-end
(8)
(12), new lockwashers
wrenches.
(13), and screws (14)
33
Frame (15)
Drop elbow (16)
Put in place.
34
Screw (17), new
Screw on and tighten using 7/16-inch box-end
lockwasher (18),
wrench.
and washer (19)
35
Drop elbow (16)
Adapter (20)
Screw on and tighten using 9/16-inch open-end
wrench.
36
Adapter (20)
Line nut (21)
a
Screw on and tighten using 9/16-inch open-
end wrench.
b
Get rid of tags.
37
Drop elbow (16)
Adapter (22)
Screw on and tighten using 9/16-inch open-end
wrench.
38
Adapter (22)
Line nut (23)
Screw on and tighten using 9/16-inch open-
end wrench.
Change 1 2-946.6
