TM 5-3805-254-20-2
POWER DIVIDER HOSES, TUBES, AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
39
Cab floor (1)
Nut (2), washer (3),
Screw on and tighten using 1-inch open-end
wrench.
cab floor adapter
(4), and new
lockwasher (5)
40
Cab floor adapter (4)
Elbow (6)
Screw on and tighten using 9/16-inch open-end
wrench.
41
Elbow (6)
Line nut (7) and
Screw on and tighten using 9/16-inch open-end
tube (8)
wrench.
42
Cab floor adapter (4)
Line nut (9), tube
a
Put tube in place.
(10), and elbow (11)
b
Screw on and tighten using 9/16-inch open-end
wrench.
43
Power divider control
Elbow (13)
Screw on and tighten using 9/16-inch open-end
valve (12)
wrench.
44
Elbow (13)
Line nut (14)
a
Screw on and tighten using 9/16-inch open-end
wrench.
b
Get rid of tags.
NOTE
FOLLOW-ON MAINTENANCE:
1
Close upper center instrument panel (page 2-439).
2
Close lower center instrument panel (page 2-438).
Change 1 2-946.8
