TM 5-3805-254-20-2
REAR BRAKES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
49.
Brake camshaft (1)
Two flat washers (2)
Put on.
NOTE
Make sure brake camshaft S-head is in horizontal position.
50.
Brake camshaft (1)
Slack adjuster (3)
a.
Coat splines with antiseizing compound.
b.
Put on.
Position lower hole as close as
possible to clevis (4).
51.
Two flat washers (5)
Put on.
52.
New ring (6)
Put into groove using retaining ring pliers.
Make sure entire ring is in groove.
53.
Slack adjuster (3)
Clevis (4), new
a.
Aline lower hole in slack adjuster with
cotter pin (7), and
clevis.
yoke pin (8)
b.
Put in yoke pin.
c.
Put cotter pin through yoke pin and bend
ends enough to prevent falling out.
TA244312
2-968
