TM 5-3805-254-20-2
REAR BRAKES - CONTINUEDTM 5-3805-254-20-2
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
57.
Brake spider (1)
Upper anchor pin (2)
a.
Coat upper anchor pin and brake spider
and upper brake-
bore with antiseizing compound.
shoe (3)
b.
Place upper brakeshoe in position.
c.
Push upper anchor pin into place.
If necessary, tap in using plastic-
face hammer.
58.
Upper anchor pin (2)
Two new packings (4)
Put on.
and two packing
retainers (5)
59.
Two new rings (6)
Put in groove using retaining ring pliers.
Make sure rings are In grooves.
60.
Upper brakeshoe (3)
Brake roller (7) and
a.
Coat brake roller and brake camshaft S-
clip (8)
head (9) with a thin layer of GAA
grease.
b.
Put brake roller in position.
c.
Position clip around brake roller and
connect to upper brakeshoe.
TA244314
2-970
