TM 5-3805-254-20-2
POWER TAKE OFF LIGHT SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2
Cab floor (1)
Power take off cover
Using number one cross-tip screwdriver,
plate (2) and two
unscrew and take out.
screws (3)
WARNING
Cab floor boards have sharp edges Care must be taken to prevent injury to personnel.
3
Power take off
Screw (5), lock-
a
Using 3/16-inch flat-tip screwdriver and
light switch (4)
washer (6), and
flashlight, unscrew and take out.
wire (7)
b
Get rid of lockwashers.
4
Power take off (8)
Power take off
Using 7/8-inch open-end wrench and
light switch (4)
flashlight, unscrew and take out.
INSTALLATION
WARNING
Cab floor boards have sharp edges Care must be taken to prevent injury to personnel.
5
Power take off (8)
Power take off
a
Clean pipe threads with wiping rag.
light switch (4)
b
Screw in and tighten using 7/8-inch
open-end wrench and flashlight.
6
Power take off
Wire (7), new lock-
Screw in and tighten using 3/16-inch flat-tip
light switch (4)
washer (6), and
screwdriver.
screw (5)
7
Cab floor (1)
Power take off
a
Put in place.
cover plate (2)
b
Screw in and tighten using number one
and two screws (3)
cross-tip screwdriver.
8
Floor mat insert (9)
Put in place
2-694
