TM 5-3805-254-20-2
DRY AIR RESERVOIR TO FRONT RELAY VALVE HOSE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
6.
Airhose (2)
a.
Check for cracks, breaks, chafing, or
hardness.
b.
Look for rust or corrosion.
7.
All threaded parts
Look for damaged threads or rounded
heads.
INSTALLATION
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts
from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-
424).
8.
Front relay
Fitting (7)
Wrap pipe threads with antiseizing tape.
valve (9)
9.
Fitting (7) and
Screw on and tighten using 1 1/4-inch and
airhose (2)
1 1/16-inch open-end wrenches.
NOTE
Steps 10 and 11 are typical for three clamps.
10.
Airhose (2)
Clamp (3)
Put on.
TA244381
Change 1 2-1083
