TM 5-3805-254-20-2
DRY AIR RESERVOIR TO WET AIR RESERVOIR HOSES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1.
90-degree elbow (1)
Line nut (2)
Using 7/8-inch open-end wrench, unscrew
and take off.
2.
90degree elbow (3)
Line nut (4)
Using 7/8-inch open-end wrench, unscrew
and take off.
3.
45-degree elbow (5)
Line nut (6) and
a.
Using 7/8-inch open-end wrench, un-
airhose (7)
screw and take off.
b.
Take out airhose.
4.
45-degree elbow (8)
Line nut (9) and
a.
Using 718-inch open-end wrench, un-
airhose (10)
screw and take off.
b.
Take out airhose.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
5.
Airhoses (7 and 10)
Clean using liquid detergent and wiping rag.
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
6.
Airhoses (7 and 10)
a.
Check for cracks, breaks, chafing, or
hardness.
b.
Look for excessive rust or corrosion.
7.
All threaded parts
Look for damaged threads or rounded
heads.
2-1078
