TM 5-3805-254-20-2
T-MANIFOLD
This task covers:
a
Removal (page 2-1077.0)
b.
Installation (page 2-1077.0)
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Dry air reservoir to T-manifold hoses disconnected
Lockwasher, T-manifold (four required)
(page 2-1074).
Brake treadle valve to T-manifold hoses discon-
Personnel Required
nected (page 2-1067).
One
Tools/Test Equipment
Goggles, safety
Wrench, box-end, 7/16-inch
Wrench, open-end, 7/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1.
T-manifold (1)
Two nuts (2),
a.
Using7/16-inch open-end wrench and 7/16-inch
lockwashers (3),
box-end wrench, unscrew, and take off.
and screws (4)
b.
Get rid of lockwashers.
2.
Bracket (5)
T-manifold (1)
Take off.
3.
Cab floor (6)
Two nuts (7),
a.
Using 7/16-inch open-end wrench and 7/16-inch
lockwashers (8),
box-end wrench, unscrew, and take off.
and screws (9)
b.
Get rid of lockwashers.
4.
Bracket (5)
Take off.
INSTALLATION
5.
Cab floor (6)
Bracket (5)
Put in place.
6.
Two nuts (7), new
Screw in and tighten using 7/16-inch box-end
lockwashers (8),
wrench and 7/16-inch open-end wrench.
and screws (9)
7.
Bracket (5)
T-manifold (1)
Put in place.
Change 1 2-1077.0
