TM 5-3805-254-20-2
CHASSIS T-FITTING TO FRONT REAR QUICK RELEASE VALVE HOSE
This task covers:
a.
Removal (page 2-1146)
c.
Inspection/Replacement (page 2-1147)
b.
Cleaning (page 2-1146)
d.
Installation (page 2-1148)
INITIAL SETUP
Tools
Personnel Required
Goggles, safety
One
Wrench, open-end, 5/8-inch
Wrench, open-end, 3/4-inch
Equipment Condition
Materials/Parts
Airbrake system drained (page 2-1034).
Detergent, liquid, GP (item 7, appendix C)
Rags, wiping (item 15, appendix C)
Tape, antiseizing (item 22, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1.
Chassis T-fitting (0.1)
Line nut (2) and
Using 3/4-inch and 5/8-inch open-end
fitting (1)
wrenches, unscrew and take off.
2.
Front rear quick release
Line nut (4), airhose
a.
Using 3/4-inch open-end wrench, un-
valve (2.1)
(5), and 45-degree
screw and take off.
elbow (3)
b.
Take out airhose.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
3.
Airhose (5)
Clean using liquid detergent and wiping rag.
Change 1 2-1146
