TM 5-3805-254-20-2
FILTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
15
Drainplug (1)
Wrap threads with antiseizing tape
(page 2-424).
16
Reservoir (2)
Drainplug (1)
Screw in and tighten using 7/16-inch open-
end wrench.
17
New filter
Put in.
element (3)
18
Relief valve (4)
Put in.
19
New ring (5)
Put on.
20
Cover (6)
Put on.
21
Eight new lock-
Screw on and tighten using 8-inch slip-joint
washers (7) and
pliers.
eight wingnuts (8)
22
Filler neck (9)
Fill with lubricating oil to 4 inches
(10.16 cm) below top of filler neck.
23
Cap (10)
Put on.
NOTE
Start engine (TM 5-3805-254-10) and allow engine to idle Turn wheels to full left and full right three times Shut
down engine (TM 5-3805-254-10).
24
Cap (10)
a
Pull up and out.
b
Using wiping rag, wipe clean.
c
Put on and push in completely.
d
Pull up and out.
If oil is up to (F) full mark, go to
step 25.
If oil is below (F) full mark, repeat
steps 21 thru 24.
25
Cap (10)
Put on.
2-1206
