TM 5-3805-254-20-2
DRAINING STEERING SYSTEM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
9
Elbow (1)
Hose (2)
Screw on and tighten using 11/16-inch and
7/8-inch open-end wrenches.
10
Elbow (3)
Hose (4)
Screw on and tighten using 11/16-inch and
7/8-inch open-end wrenches.
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts from
seizing.
NOTE
For more information on how to use antiseizing tape go to General Maintenance Instructions (page 2-424).
11
Right steering
Drainplug (6)
a
Wrap with antiseizing tape.
gear (5)
Screw in and tighten using 9/16-inch
open-end wrench.
12
Left frame
Clamp (8), screw
Screw in and tighten using two 7/16-inch
rail (7)
(9), new lockwasher
open-end wrenches.
(10), and nut (11)
13
Elbow (12)
Hose (4)
Screw on and tighten using 11/16-inch and
7/8-inch open-end wrenches.
14
Elbow (13)
Hose (2)
Screw on and tighten using 11/16-inch and
7/8-inch open-end wrenches.
15
Left steering
Drainplug (15)
a
Wrap with antiseizing tape.
gear (14)
b
Screw in and tighten using 9/16-inch
open-end wrench.
16
Reservoir (16)
Drainplug (17)
a
Wrap with antiseizing tape.
b
Screw in and tighten using 7/16-inch
open-end wrench.
2-1210
