TM 5-3805-254-20-2
LEFT STEERING GEAR-TO-RESERVOIR HOSE AND FITTINGS
This task covers:
a
Removal (page 2-1212)
c
Inspection/Replacement (page 2-1214)
b
Cleaning (page 2-1212)
d
Installation (page 2-1214)
INITIAL SETUP
Tools
Personnel Required
Container, 6-gallon
One
Goggles, safety
Gun, blow, air
Equipment Condition
Hose, air assembly
Wrench, open-end, 3/4-inch
Left side hood panel opened (page 2-424).
Wrench, open-end, 1-inch
Materials/Parts
Detergent, liquid, GP (item 7, appendix C)
Tape, antiseizing (item 22, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Elbow (1)
Hose (2)
a
Place 6-gallon container underneath.
b
Using 3/4-inch and 1-inch open-end
wrenches, unscrew and take off.
Allow oil to drain.
2
Reservoir (3)
Elbow (1)
Using 314-inch open-end wrench, unscrew
and take out.
3
Elbow (4)
Hose (2)
Using 3/4-inch and 1-inch open-end
wrenches, unscrew and take off.
4
Left steering
Elbow (4)
Using 3/4-inch open-end wrench, unscrew
gear (5)
and take out.
CLEANING
WARNING
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can injure personnel and
cause damage to equipment Refer to TM 9-247.
2-1212
