TM 5-3805-254-20-2
LEFT STEERING GEAR-TO-RIGHT STEERING GEAR HOSE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Elbow (1)
Hose (2)
a
Place 6-gallon container underneath.
b
Using 11/16-inch and 7/8-inch open-
end wrenches, unscrew and take off.
Allow oil to drain.
2
Adapter (3)
Elbow (1)
Using 11/16-inch and 3/4-inch open-end
wrenches, unscrew and take out.
3
Left steering
Adapter (3)
Using 314-inch open-end wrench, unscrew
gear (4)
and take out.
4
Four clamps (5)
Four screws (6),
a
Using two 7/16-inch box-end wrenches,
four nuts (7), and
unscrew and take out.
four lockwashers (8)
b
Get rid of lockwashers.
5
Hose (2)
Take out.
6
Elbow (9)
Hose (2)
Using 11/16-inch and 7/8-inch open-end
wrenches, unscrew and take off.
7
Right steering
Elbow (9)
Using 11/16-inch open-end wrench, un-
gear (10)
screw and take out.
CLEANING
WARNING
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can injure personnel and
cause damage to equipment Refer to TM 9-247.
NOTE
Hose and fittings must be cleaned thoroughly.
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-424).
8
All parts
Using detergent and water, clean
thoroughly.
2-1216
