TM 5-3805-254-20-2
RIGHT STEERING GEAR-TO-LEFT STEERING GEAR HOSE AND FITTINGS
This task covers:
a
Removal (page 2-1220)
c
Inspection/Replacement (page 2-1222)
b
Cleaning (page 2-1221)
d
Installation (page 2-1222)
INITIAL SETUP
Tools
Materials/Parts
Container, 6-gallon
Detergent, liquid, GP (item 7, appendix C)
Goggles, safety
Lockwasher, clamp (four required)
Gun, blow, air
Tape, antiseizing (item 22, appendix C)
Hose, air assembly
Wrench, box-end, 7/16-inch (two
Personnel Required
required)
Wrench, open-end, 11/16-inch
One
Wrench, open-end, 314-inch
Wrench, open-end, 7/8-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Elbow (1)
Hose (2)
a
Place 6-gallon container underneath.
b
Using 11/16-inch and 7/8-inch open-
end wrenches, unscrew and take off.
Allow oil to drain.
2
Right steering
Elbow (1)
Using 11/16-inch open-end wrench, un-
gear (3)
screw and take out.
3
Four clamps (4)
Four screws (5),
a
Using two 7/16-inch box-end wrenches,
four nuts (6), and
unscrew and take out.
four lockwashers (7)
b
Get rid of lockwashers.
4
Hose (2)
Take out.
5
Elbow (8)
Hose (2)
Using 11/16-inch and 7/8-inch open-end
wrenches, unscrew and take off.
6
Adapter (9)
Elbow (8)
Using 11/16-inch and 3/4-inch open-end
wrenches, unscrew and take out.
7
Left steering
Adapter (9)
Using 3/4-inch open-end wrench, unscrew
gear (10)
and take out.
2-1220
