TM 5-3805-254-20-2
RESERVOIR-TO-PUMP HOSE AND FITTINGS
This task covers:
a
Removal (page 2-1224)
c
Inspection/Replacement (page 2-1226)
b
Cleaning (page 2-1225)
d
Installation (page 2-1226)
INITIAL SETUP
Tools
Materials/Parts
Container, 6-gallons
Detergent, liquid, GP (item 7, appendix C)
Goggles, safety
Tape, antiseizing (item 22, appendix C)
Gun, blow, air
Hose, air assembly
Personnel Required
Wrench, open-end, 7/16-inch
Wrench, open-end, 1 5/16-inch
One
Wrench, open-end,1 11/2-inch
(two required)
Equipment Condition
Right side hood panel opened (page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Reservoir (1)
Drainplug (2)
a
Place 6-gallon container underneath.
b
Using 7/16-inch open-end wrench, un-
screw and take out.
Allow oil to drain.
2
Elbow (3)
Hose (4)
Using 1 5/16-inch and 1 112-inch open-end
wrenches, unscrew and take off.
3
Reservoir (1)
Elbow (3)
Using 1 5/16-inch open-end wrench, un-
screw and take out.
4
Elbow (5)
Hose (4)
Using two 1 1/2-inch open-end wrenches,
unscrew and take off.
2-1224
