TM 5-3805-254-20-2RIGHT STEERING GEAR-TO-LEFT STEERING GEAR HOSE AND FITTINGS - CONTINUEDACTIONLOCATION ITEM REMARKSCLEANING - CONTINUEDWARNINGParticles blown by compressed air are hazardous Make certain the air stream is directed away from user andother personnel in the area Compressed air used for cleaning purposes shall not exceed 30 psi (207 kPa) Usermust wear safety goggles or face shield to prevent injury to personnel.9Elbow (1), hose (2),Using air blow gun and air hose assembly,elbow (3), andblow dry.adapter (4)INSPECTION/REPLACEMENTNOTEReplace all damaged or defective parts.For more information on how to inspect parts, go to General Maintenance Instructions(page 2-424).10Elbow (1), elbowLook for bends, dents, or cracks.(3), and adapter (4)11Hose (2)Look for worn areas or gouges.12All threaded partsLook for damaged threads or roundedheads.INSTALLATION13Left steeringAdapter (4)aWrap pipe threads with antiseizing tapegear (5)(page 2-424).bScrew in and tighten using 3/4-inchopen-end wrench.14Adapter (4)Elbow (1)aWrap pipe threads with antiseizing tape(page 2-424).bScrew in and tighten using 11/16-inchand 3/4-inch open-end wrenches.15Elbow (1)Hose (2)Screw on and tighten using 11/16-inch and718-inch open-end wrenches.16Four clamps (6)Hose (2)Put in.2-1222
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business