TM 5-3805-254-20-2
PUMP-TO-LEFT STEERING GEAR HOSE AND FITTINGS
This task covers:
a
Removal (page 2-1228)
c
Inspection/Replacement (page 2-1230)
b
Cleaning (page 2-1229)
d
Installation (page 2-1230)
INITIAL SETUP
Tools
Materials/Parts
Container, 6-gallon
Detergent, liquid, GP (item 7, appendix C)
Goggles, safety
Ring, elbow pump
Gun, blow, air
Tape, antiseizing (item 22, appendix C)
Hose, air assembly
Wrench, open-end, 7/16-inch
Personnel Required
Wrench, open-end, 13/16-inch
Wrench, open-end, 7/8-inch (two
One
required)
Equipment Condition
Left side hood panel opened (page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Reservoir (1)
Drainplug (2)
a
Place 6-gallon container underneath.
b
Using 7/16-inch open-end wrench, un-
screw and take out.
Allow oil to drain.
2
Elbow (3)
Hose (4)
Using 13/16-inch and 7/8-inch open-end
wrenches, unscrew and take off.
3
Left steering
Elbow (3)
Using 13/16-inch open-end wrench, un-
gear (5)
screw and take out.
4
Elbow (6)
Hose (4)
Using two 7/8-inch open-end wrenches,
unscrew and take off.
5
Pump (7)
Elbow (6) and
a
Using 7/8-inch open-end wrench, un-
Ring (8)
screw and take out.
b
Get rid of ring.
2-1228
