TM 5-3805-254-20-2
PUMP BYPASS HOSE AND FITTINGS
This task covers:
a
Removal (page 2-1232)
c
Inspection/Replacement (page 2-1234)
b
Cleaning (page 2-1234)
d
Installation (page 2-1235)
INITIAL SETUP
Tools
Materials/Parts - Continued
Container, 6-gallon
Solvent, drycleaning (item 19, appendix C)
Goggles, safety
Tape, antiseizing (item 22, appendix C)
Gun, blow, air
Hose, air assembly
Personnel Required
Wrench, open-end, 7116-inch
Wrench, open-end, 3/4-inch
One
Wrench, open-end, 13/16-inch
Wrench, open-end, 1-inch
Equipment Condition
Wrench, open-end, 1 1/2-inch (two
required)
Left side hood panel opened (page 2-424).
Left side cab door opened (page 2-424).
Materials/Parts
Detergent, liquid, GP (item 7,
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Reservoir (1)
Drainplug (2)
a
Place 6-gallon container underneath.
b
Using 7116-inch open-end wrench, un-
screw and take out.
Allow oil to drain.
2
Elbow (3)
Hose (4)
Using 3/4-inch and 1-inch open-end
wrenches, unscrew and take off.
3
Elbow (5)
Elbow (3)
Using 3/4-inch and 1 112-inch open-end
wrenches, unscrew and take out.
4
Hose (6)
Using two 1 1/2-inch open-end wrenches,
unscrew and take off.
5
Elbow (7)
Hose (4)
Using 13116-inch and 1-inch open-end
wrenches, unscrew and take off.
2-1232
