TM 5-3805-254-20-2
REARVIEW MIRROR ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
34.
Upper mirror clamp
Mirror head (3)
Place in position and hold.
(1) to lower mirror
clamp (2)
35.
Mirror head (3)
Nut (4) and new
Screw on and tighten using 1/2-inch box-
to lower mirror
lockwasher (5)
end wrench.
clamp (2)
36.
Mirror head (3)
Nut (6) and new
Screw on and tighten using 1/2-inch box-
to upper mirror
lockwasher (7)
end wrench.
clamp (1)
ADJUSTMENT
NOTE
Steps given are typical for adjusting right and left rear view mirrors.
Assistant will be needed to adjust right rear view mirror.
37.
Rearview mirror
Two dome nut caps
Unscrew and take off by hand.
arm (8) to mirror
(11 and 12)
mounting brackets
(9 and 10)
TA244512
2-1296