TM 5-3805-254-20-2
WIPER BLADE AND ARM
This task covers:
a.
Removal (page 2-1301)
c.
Adjustment (page 2-1302)
b.
Installation (page 2-1302)
INITIAL SETUP
Tools
Personnel Required
Bar, pinch, 12-inch
One
Hammer, hand, 12-ounce
Handle, ratchet, 1/4-inch drive
Equipment Condition
Punch, flat-tip, 3/8-inch
Screwdriver, flat-tip, 1/8-inch
Engine started to build up air pressure
Socket, 1/4-inch, 1/4-inch drive
(TM 5-3805-254-10).
Wrench, box-end, 5/8-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
The steps in this task are typical for both left and right wiper arm and blade.
1.
Wiper arm assembly
Acorn nut (3)
Using 5/8-inch box-end wrench, unscrew
(1) to driver shaft (2)
and take off.
TA244517
2-1301