TM 5-3805-254-20-2
DUMP BODY REFLECTORS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn, when using chisel and drill, to prevent eye injury caused by
flying steel chips.
NOTE
There are six reflectors on the dump body. The two front reflectors are amber; the four
rear reflectors are red. The four rear reflectors are initially installed with rivets.
1.
Reflector (1) to
Rivet (3)
a.
Using 12-ounce ball-peen hammer and
body (2)
1/4-inch cold-hand chisel, cut off.
b.
Using 12-ounce ball-peen hammer and
3/16-inch straight drive-pin punch, tap
out.
2.
Body (2)
Reflector (1)
a.
Take off.
b.
Get rid of reflector.
TA244535
2-1322
