TM 5-3805-254-20-2
WINDSHIELD WIPER MOTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION, DRIVER’S SIDE
15.
Windshield wiper
Wiper mount
Place in position.
motor (1)
bracket (2)
16.
Wiper mount bracket
Two screws (3)
Screw in and tighten using number one
(2) to windshield
cross-tip screwdriver.
wiper motor (1)
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent
threaded parts from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance
Instructions (page 2-424).
17.
Windshield wiper
Fitting (4)
a.
Wrap pipe threads with antiseizing tape.
motor (1)
b.
Screw in and tighten using 1/2-inch
open-end wrench.
18.
Windshield wiper
Adapter fitting (5)
a.
Wrap pipe threads with antiseizing tape.
motor(1)
b.
Screw in and tighten using 7/16-inch
box-end wrench.
19.
Two tee fittings (6)
a.
Wrap pipe threads with antiseizing tape.
b.
Screw in and tighten using 1/2-inch
open-end wrench.
20.
Wiper mount
Inner spacer (7)
Place in position.
bracket (2)
21.
Front trim panel
Windshield wiper
Place in position.
head retainer (8)
motor (1)
22.
Wiper mount bracket
Two screws (9)
Screw in and tighten using number one
(2) to front trim
cross-tip screwdriver.
panel head retainer (8)
23.
Windshield wiper
Five line
a.
Screw on and tighten using 9/16-inch
motor (1)
fittings (10)
open-end wrench.
b.
Take tags off.
2-1328
