TM 5-3805-254-20-2
WINDSHIELD WIPER MOTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL, PASSENGER’S SIDE - CONTINUED
39.
Wiper mount
Inner spacer (2)
Take off.
bracket (1)
40.
Wiper mount bracket
Two screws (4)
Using number one cross-tip screwdriver,
(1) to windshield
unscrew and take out.
wiper motor (3)
41.
Windshield wiper
Wiper mount
Take off.
motor (3)
bracket (1)
INSTALLATION, PASSENGER’S SIDE
42.
Windshield wiper
Wiper mount
Place in position.
motor (3)
bracket (1)
43.
Wiper mount bracket
Two screws (4)
Screw in and tighten using number one
(1) to windshield
cross-tip screwdriver.
wiper motor (3)
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal to prevent
threaded parts from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance
Instructions (page 2-424).
44.
Windshield wiper
Fitting (5)
a.
Wrap pipe threads with antiseizing tape.
motor (3)
b.
Screw in and tighten using 1/2-inch
open-end wrench.
45.
Windshield wiper
Three elbow
a.
Wrap pipe threads with antiseizing tape.
motor (3)
fittings (6)
b.
Screw in and tighten using 1/2-inch
open-end wrench.
46.
Wiper mount
Inner spacer (2)
Place in position.
bracket (1)
47.
Front trim panel
Windshield wiper
Place in position.
head retainer (7)
motor (3)
2-1334
