TM 5-3805-254-20-2
WINDSHIELD WIPER CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Cover plate (1)
Six screws (2)
Using number one cross-tip screwdriver,
unscrew and take out.
2
Cover plate (1)
Take down.
3
Optical ribbon (3)
Take off.
NOTE
Tag all line fittings before removing for correct identification when installing.
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
4
Fitting (4)
Line fitting (5)
a
Using 5/8-inch open-end wrench, un-
screw and take off.
b
Tag line fitting.
5
Elbow fitting (6)
Line fitting (7)
a
Using 9/16-inch open-end wrench, un-
screw and take off.
b
Tag line fitting.
6
T-fitting (8)
Line fitting (9)
a
Using 9/16-inch open-end wrench, un-
screw and take off.
b
Tag line fitting.
7
Adapter fitting (10)
Line fitting (11)
a
Using 9/16-inch open-end wrench, un-
screw and take off.
b
Tag line fitting.
8
Windshield wiper
Setscrew (13)
Using 5/64-inch hex-head wrench, loosen
control knob (12)
one turn.
to cover plate (1)
9
Cover plate (1)
Windshield wiper
Take off.
control knob (12)
10 Windshield wiper
Nut (15)
Using 13/16-inch open-end wrench, un-
control (14)
screw and take off.
2-1338
