TM 5-3805-254-20-2
WINDSHIELD WASHER CONTROL
This task covers:
a.
Removal (page 2-1342)
b.
Installation (page 2-1343)
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, cross-tip, number one
Tape, antiseizing (item 22, appendix C)
Wrench, hex-head, 5/64-inch
Wrench, open-end, 1/2-inch
Personnel Required
Wrench, open-end, 9/16-inch
Wrench, open-end, 5/8-inch
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Cover plate (1)
Six screws (2)
a
Using number one cross-tip screw-
driver, unscrew and take out.
b
Take down cover plate.
2
Optical ribbon (3)
Take off.
3
Windshield washer
Setscrew (5)
Using 5/64-inch hex-head wrench, loosen
control knob (4)
one turn.
to cover plate (1)
4
Cover plate (1)
Windshield washer
Take off.
control knob (4)
5
Windshield washer
Nut (7)
Using 5/8-inch open-end wrench, unscrew
control (6)
and take off.
6
Cover plate (1)
Windshield washer
Take out.
control (6)
7
Windshield washer
Flat washer (8)
Take off.
control (6)
8
Elbow fitting (9)
Line fitting (10)
Using 9/16-inch open-end wrench, un-
to windshield washer
screw and take off.
control (6)
2-1342
