TM 5-3805-254-20-2
WINDSHIELD WASHER CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
9
Windshield washer
Elbow fitting (9)
Using 1/2-inch open-end wrench, unscrew
control (6)
and take off.
10
Rubber hose (11)
Take off.
INSTALLATION
11 Windshield washer
Rubber hose (11)
Place in position.
control (6)
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts
from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-
424).
12
Elbow fitting (9)
a
Wrap pipe threads with antiseizing tape.
b
Screw in and tighten using 1/2-inch
open-end wrench.
13 Elbow fitting (9) to
Line fitting (10)
Screw on and tighten using 9/16-inch open-
windshield washer
end wrench.
control (6)
TA244549
2-1343
