TM 5-3805-254-20-2
AIR HORN
This task covers:
a.
Removal (page 2-1345)
b.
Installation (page 2-1348)
INITIAL SETUP
Tools
Materials/Parts
Pliers, slip-joint, 6-inch
Lockwasher, air horn (three required)
Screwdriver, cross-tip, number two
Tape, antiseizing (item 22, appendix C)
Screwdriver, cross-tip, number three
Wrench, open-end, 7/16-inch
Personnel Required
Wrench, open-end, 9/16-inch
Two
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Molding (1) to
Fourteen screws (3)
Using number two cross-tip screwdriver,
head lining (2)
unscrew and take out.
2
Head lining (2)
Molding (1)
Take off.
TA244551
2-1345
