TM 5-3805-254-20-2
WINDSHIELD WASHER RESERVOIR AND PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2
Reservoir mounting
Tank (2)
Take out.
bracket (1)
3
Tank (2)
Cap (3)
Unscrew and take off.
4
Cap (3)
Hose (4), hose (5),
Remove.
tubing (6), air valve
(7), and windshield
washer pump (8)
5
Strap (9)
Four locknuts (10),
a
Using 7/16-inch open-end wrench and
lockwashers (11),
7/16-inch box-end wrench, unscrew, and
take off.
washers (12), and
b
Get rid of lockwashers.
bolts (13)
6
Bracket (14)
Strap (9) and reservoir
Take off.
mounting bracket (1)
INSTALLATION
7
Bracket (14)
Strap (9) and reservoir
Put in place
mounting bracket (1)
8
Strap (9)
Four locknuts (10),
Screw in and tighten, using 7/16-inch box-end
new lockwashers
wrench and 7/16-inch open-end wrench.
(11), washers (12),
and bolts (13)
9
Cap (3)
Hose (4), hose (5),
Install.
tubing (6), air valve
(7), and windshield
washer pump (8)
10 Tank (2)
Cap (3)
Screw in and tighten.
11 Reservoir mounting
Tank (2)
Put in place.
bracket (1)
12 Air.valve (7)
Hose (15) and hose (16)
Connect.
Change 1 2-1344.2
