TM 5-3805-254-20-2
WINDSHIELD WIPER CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts
from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-
424).
19
Windshield wiper
Elbow fitting (2)
a
Wrap pipe threads with antiseizing tape.
control (1)
b
Screw in and tighten using 9/16-inch
open-end wrench.
20
Elbow fitting (2)
Elbow fitting (3)
a
Wrap pipe threads with antiseizing tape.
b
Screw in and tighten using 1/2-inch
open-end wrench.
21
Windshield wiper
Adapter fitting (4)
a
Wrap pipe threads with antiseizing tape.
control (1)
b
Screw in and tighten using 7/16-inch
open-end wrench.
22
T-fitting (5)
a
Wrap pipe threads with antiseizing tape.
b
Screw in and tighten using 1/2-inch
open-end wrench.
23
T-fitting (5)
Fitting (6)
a
Wrap pipe threads with antiseizing tape.
b
Screw in and tighten using 1/2-inch
open-end wrench.
24
T-fitting (5) to
Fitting (7)
a
Wrap pipe threads with antiseizing tape.
windshield wiper
b
Screw in and tighten using 9/16-inch
control (1)
open-end wrench.
25
Windshield wiper
New lockwasher (8)
Place in position.
control (1)
26
Cover plate (9)
Windshield wiper
Place in position.
control (1)
27
Windshield wiper
Nut (10)
Screw on and tighten using 13/16-inch
control (1)
open-end wrench.
28
Cover plate (9)
Windshield wiper
Place in position.
control knob (11)
2-1340
