TM 5380525420-2
SPEEDOMETER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTIONIREPLACEM ENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
7
Speedometer (1)
a
Look for cracks, dents, or damaged
threads.
b
Check to see if gage is readable.
8
Mounting bracket (2)
Look for cracks, bends, or breaks.
INSTALLATION
9
Lower center instru-
Speedometer (1)
Put in and hold.
ment panel (3)
Position as shown.
10 Speedometer (1)
Mounting bracket (2)
Put on.
11 Mounting bracket (2)
Two new lockwashers
Screw on and tighten using 3/8-inch open-
(4) and two nuts (5)
end wrench.
12 Speedometer (1)
Speedometer drive
Put in.
cable (6)
Aline square end of drive tip with
square hole of speedometer.
13
Cable retainer
Screw on and tighten using 3/4-inch open-
nut (7)
end wrench.
14
Light socket (8)
Push in.
2-1410
