TM 53805-254-20-2
SPEEDOMETER DRIVE CABLE
This task covers:
a
Removal (page 2-1414)
c
Installation (page 2-1416)
b
Inspection/Replacement (page 2-1416)
INITIAL SETUP
Tools
Personnel Required
Wrench, box-end, 7/16-inch
One
(two required)
Wrench, open-end, 3/4-inch
Equipment Condition
Wrench, open-end, 1-inch
Left side cab door opened (page 2-424).
Materials/Parts
Lower center instrument panel opened
(page 2-424).
Lockwasher, left frame rail
Left side hood panel opened (page 2-424).
(two required)
Air cleaner housing removed (page 2-452).
Lockwasher, engine side of firewall
Rags, wiping (item 15, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Adapter (1) on
Cable retainer
a
Using wiping rag, wipe clean.
auxiliary
nut (3)
b
Holding adapter and using 1-inch open-
transmission (2)
end wrench, unscrew and slide back.
2.
Speedometer drive
Pull out.
cable (4)
3.
Two extensions (5)
Two clips (6), two
a
Using two 7/16-inch box-end wrenches,
nuts (7), two lock-
unscrew and take out.
washers (8), and two
b
Get rid of lockwashers.
screws (9)
4.
Speedometer drive
Two clips (6)
Take off.
cable (4)
2-1414
