TM 53805254-20-2
TACHOMETER DRIVE CABLE
This task covers:
a.
Removal (page 2-1420)
c.
Installation (page 2-1422)
b.
Inspection/Replacement (page 2-1422)
_
INITIAL SETUP
Tools
Personnel Required
Pliers, diagonal-cutting, 6-inch
One
Screwdriver, cross-tip, number two
Wrench, open-end, 3/4-inch
Equipment Condition
Wrench, open-end, 1-inch
Lower center instrument panel opened
Materials/Parts
(page 2-424).
Left side hood panel opened (page 2-424).
Adhesive, liquid rubber (item 1,
Left side cab door opened (page 2-424).
appendix C)
Lockwasher (two required)
Strap, tiedown (item 20, appendix C)
Tape, pressure-sensitive (item 22,
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind lower center instrument panel to prevent breaking or disconnecting wires.
1
Tachometer (1)
Cable retainer
Using 3/4-inch open-end wrench, unscrew
nut (2)
and slide back.
2
Tachometer drive
Pull out.
cable (3)
3
Engine side of fire-
Pressure-sensitive
a
Take off.
wall (4), tachome-
tape (6)
b
Get rid of.
ter drive cable (3),
and windshield wiper
exhaust hose (5)
2-1420
