TM 5-3805-254-20-2
TACHOMETER DRIVE CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
20 Left radiator stabi-
New electrical tie-
Wrap loosely.
lizer rod (1) and
down strap (3)
tachometer drive
cable (2)
21 Engine side of
Tachometer drive
Push through tachometer drive cable hole.
firewall (4)
cable (2)
22 Tachometer drive
Grommet (5)
a
Put on.
cable (2)
b
Slide into place.
23 Engine side of
Grommet retainer
Screw in and tighten using number two
firewall (4)
halves (6), two
cross-tip screwdriver.
new lockwashers
(7), and two
screws (8)
24
Insulation (9)
Glue into place using liquid rubber
adhesive.
25
Tachometer drive
Wrap using pressure-sensitive adhesive
cable (2) and
tape.
windshield wiper
exhaust hose (10)
CAUTION
Use care when working behind lower center instrument panel to prevent breaking or disconnecting wires.
26 Tachometer (11)
Tachometer drive
Put in.
cable (2)
Aline square end of drive tip (12) with
square hole of tachometer.
27
Cable retainer
Screw on and tighten using 3/4-inch open-
nut (13)
end wrench.
2-1424
