TM 53805-2520-2
ENGINE OIL PRESSURE GAGE
This task covers:
a
Removal (page 2-1426)
c
Installation (page2-1428)
b
Inspection/Replacement (page 2-1427)
INITIAL SETUP
Tools
Personnel Required
Wrench, open-end, 3/8-inch
One
Wrench, open-end, 9/16-inch
(two required)
Equipment Condition
Materials/Parts
Upper center instrument panel opened
(page 2-424).
Lockwasher (two required)
Left side cab door opened (page 2-424).
ACTION
LOCATION
ITEM
REMARKS
CAUTION
Use care when working behind upper center instrument panel to prevent breaking or disconnecting wires.
1
Gage (1)
Light socket (2)
Pull out.
2
Adapter (3)
Line (4)
Using two 9/16-inch open-end wrenches,
unscrew and take off.
3
Gage (1)
Adapter (3)
Using 9/16-inch open-end wrench, un-
screw and take out.
4
Two nuts (5) and two
a
Hold gage.
lockwashers (6)
b
Using 3/8-inch open-end wrench, un-
screw and take out.
c
Get rid of lockwashers.
5
Mounting bracket (7)
Take off.
6
Upper center instru-
Gage (1)
Take out.
ment panel (8)
2-1426