TM 5-3805-254-20-2
ENGINE OIL PRESSURE GAGE LINE AND FIT
This task covers:
a.
Removal (page 2-1430)
b.
Disassembly (page 2-1436)
c.
Cleaning (page 2-1438)
d.
Inspection/Replacement (page 2-1438)
e.
Assembly (page 2-1439)
f.
Installation (page 2-1440)
INITIAL SETUP
Tools
Extension, 10-inch, 1/2-inch drive
Goggles, safety
Gun, blow, air
Handle, ratchet, 1/2-inch drive
Hose, air, assembly
Pliers, diagonal-cutting, 6-inch
Screwdriver, flat-tip, 3/16-inch
Socket, deep, 111/8-inch, 1/2-inch
drive
Wrench, open-end, 7/16-inch (two
required)
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch (two
required)
Wrench, open-end, 3/4-inch
Wrench, open-end, 1-inch
Wrench, open-end, 1 1/8-inch
Materials/Parts
Detergent, liquid, GP (item 7, appendix C)
Lockwasher
Strap, tiedown (item 20, appendix C)
Tags, marker (item 21, appendix C)
Tape, antiseizing (item 22, appendix C)
Personnel Required
Two
Equipment Condition
Left side cab door opened (page 2-424).
Air cleaner housing removed (page 2-452).
Upper center instrument panel opened
(page 2-424).
Lower center instrument panel opened
(page 2-424).
2-1429
