TM 5-3805-254-20-2
ENGINE OIL PRESSURE GAGE LINE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
21. Oil pressure
Five wires (2) and
a.
Tag wires.
switch (1)
three screws (3)
b.
Using 3/16-inch flat-tip screwdriver,
loosen screws.
Do not take out screws.
c.
Take off wires.
22. 45-degree elbow (4)
Oil pressure
Using 7/16-inch open-end wrench, un-
switch (1)
screw and take out.
NOTE
Assistance will be required to perform steps 23 and 24.
23. Bulkhead fitting
Nut (7)
Using 1-inch open-end wrench, hold nut
(5) engine side of
from turning.
firewall (6)
TA244604
2-1434
