TM 5-3805-254-20-2
ENGINE OIL PRESSURE GAGE LINE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts
from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-
424).
37.
Straight pipe
Wrap pipe threads with antiseizing tape.
fitting (4)
38. Bulkhead
Small nut (6)
Screw on and tighten using 1-inch and
fitting (5)
and large nut (7)
1 1/8-inch open-end wrenches.
39.
Straight pipe
Screw in and tighten using 7/16-inch and
fitting (4)
1-inch open-end wrenches.
40.
Large nut (7)
Unscrew and take off using 1-inch and
1 1/8-inch open-end wrenches.
41. Straight pipe
T-fitting (8)
Screw on and tighten using 7/16-inch and
fitting (4)
9/16-inch open-end wrenches.
42.
90-degree elbow (9)
Wrap pipe threads with antiseizing tape.
and 45-degree
elbow (10)
2-1439
