TM 5-3805-254-20-2
ENGINE OIL PRESSURE GAGE LINE AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
51.
Oil pressure
Wrap pipe threads with antiseizing tape
switch (1)
(page 2-424).
52. 45-degree elbow (2)
Oil pressure
Screw in and tighten using 7/16-inch open-
switch (1)
end wrench.
53. Oil pressure
Five wires (3)
Put wires under correct screw heads.
switch (1)
54.
Three screws (4)
a.
Screw in and tighten using 3/16-inch
flat-tip screwdriver.
b.
Get rid of tags.
55. 90-degree elbow (5)
Line (6)
Screw on and tighten using 112-inch and
9/16-inch open-end wrenches.
56. Clamp (7)
Line (6)
a.
Put in.
b.
Close clamp (7).
57. Bracket (8)
Screw (9), clamp
Screw in and tighten using two 7/16-inch
(7), new lockwasher
open-end wrenches.
(10. and nut (11)
TA244611
2-1442
