TM 5-3805-254-20-2
AIR PRESSURE GAGE LINES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
WARNING
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can injure personnel and
cause damage to equipment. Refer to TM 9-247.
NOTE
All lines and fittings must be cleaned thoroughly.
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
8.
Lines (2 and 5) and
Using liquid detergent and water clean
fittings (1 and 6)
thoroughly.
WARNING
Particles blown by compressed air are hazardous. Make certain the air stream is directed away from user
and other personnel in the area. Compressed air used for cleaning purposes shall not exceed 30 psi (207
kPa). User must wear safety goggles or face shield to prevent injury to personnel.
9.
Lines (2 and 5) and
Using air blow gun and air assembly, blow
fittings (1 and 6)
dry.
TA244653
2-1493
