TM 5-3805-254-34
6-11. TORQUE CONVERTER REPLACEMENT
9.
Position stator roller holder (20) into stator (2)
against thrust bearing race (6).
10.
Install ten springs (8) into spring pockets of
stator (2).
11.
Install ten rollers (7) using stator roller holder
(20)
to
keep
rollers
in
place.
12.
Position thrust bearing (5) on roller race (3) and install roller race into stator (2) while rotating roller race clockwise.
Remove stator roller holder (20) as roller race is installed.
13.
Rotate roller race (3) counterclockwise slightly to lock roller race to stator (2).
TA703801
6-78
