TM 5-3805-254-34
6-23.
FIRST CLUTCH AND RING GEAR REPLACEMENT (Con’t).
3.
Measure thickness of clutch plate (1). Clutch plate
must measure no less than 0.1161 in. (2.9489 mm).
4.
Measure thickness of six clutch plates (5). Clutch
plates must measure no less than 0.0993 in. (2.5222
mm).
5.
Measure thickness of six clutch disks (2). Clutch
disks must measure no less than 0.1347 in. (3.4214
mm).
c.
INSTALLATION
1.
Apply thin coat of hydraulic fluid to surface of all
metal parts, including clutch plates (1 and 5) and
clutch disks (2).
2.
Place first clutch ring gear (3) on work surface with
short splines facing downward.
3.
Beginning with one clutch disk (2) first, alternately
install five clutch disks and five clutch plates (5) on
first clutch ring gear (3).
4.
While holding clutch disks (2), clutch plates (5), and
first clutch ring gear (3) together as an assembly,
turn assembly over and install in transmission
housing (4).
TA703826
6-107
