TM 5-3805-254-34
6-24. CENTER SUPPORT REPLACEMENT (Con’t).
b.
INSTALLATION
NOTE
Ensure that tapped hole in center support Is alined with center support bolt hole In side of
transmission housing.
1.
Using center support lifting bracket attached to hub of center support (7), install center support into transmission
housing (3).
2.
Install center support washer (5) and center support bolt (6) to side of transmission housing (3).
NOTE
Snapring Is one of four color marked snaprings that can be selected for Installation.
3.
Install large snapring (4) into transmission
housing (3).
4.
Rotate transmission housing (3) so rear of
transmission housing Is facing upward.
5.
Remove
two
bolts
(2),
center
support
compressor, and adapter housing (1) from
transmission housing (3).
FOLLOW-ON TASKS:
•
Install first clutch and ring gear (see paragraph 6-23).
TA703830
6-111
