TM 5-3805-254-34
6-26. SECOND CLUTCH REPLACEMENT.
This Task Covers:
a.
Removal
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
•
Gear unit removed (see paragraph 6-25).
Tools/Test Equipment:
•
General mechanic's tool kit
•
Field automotive shop set
a.
REMOVALI
1. Rotate transmission housing (3) so front of
transmission housing Is facing upward.
2. Remove large snapring (1) from transmission
housing (3).
NOTE
First clutch plate removed is slightly thicker than
others. Note location of thick clutch plate for
Installation.
3. Remove clutch plate (2).
c. Installation
Materials/Parts:
•
Hydraulic fluid (Item 7, Appendix B)
•
Dry cleaning solvent (Item 23, Appendix B)
General Safety Instructions:
•
Dry cleaning solvent is flammable and must not
be used near open flame. Use only in a well-
ventilated area.
TA703832
6-114
