TM 5-3805-254-34
6-26.
SECOND CLUTCH REPLACEMENT (Con’t
3.
Measure thickness of clutch plate (2). Clutch
plate must measure no less than 0.1161 in.
(2.9489 mm).
4.
Measure thickness of six clutch plates (5).
Clutch plates must measure no less than 0.0993
in. (2.mm).
5.
Measure thickness of six clutch disks (4). Clutch
disks must measure no less than 0.1347 in.
(3.4214 mm).
c.
INSTALLATION I
1.
Apply thin coat of hydraulic fluid to surface of
metal parts, including clutch plates (2 and 5) and
clutch disks (4).
NOTE
Install thick clutch plate last.
2.
Beginning with one clutch plate (5), alternately
Install six clutch plates and six clutch disks (4)
into transmission housing (3).
3.
Install clutch plate (2).
4.
Install large snapring (1).
FOLLOW-ON TASKS:
•
Install gear unit (see paragraph 6-25).
TA703834
6-116
