TM 5-3805-254-34
6-31.
FOURTH CLUTCH REPAIR (Con’t).
6.
Beginning with one clutch plate (5), alternately
install five clutch plates and five clutch disks (3)
into housing (4).
7.
Install backing plate (2) and snapring (1) into
housing (4).
8.
While lifting backing plate (2) against snapring
(1), measure clearance between top clutch plate
(5) and backing plate. Clearance must be 0.080-
00.120 in. (2.032-3.048 mm).
9.
If clearance Is not within specified limits, replace
clutch disks (3) and clutch plates (5) until proper
clearance Is obtained. Clearance closer to
0.080 in. (2.032 mm) is preferred.
TA703862
6-145
