TM 5-3805-254-34
8-4. REAR-REAR AXLE REPLACEMENT (Cont).
2.
Remove nut (3) and bolt (4) from each of four brackets (6).
3.
Remove six nuts (5) and bolts (7) from each of four brackets (6).
WARNING
Keep clear of vehicle as vehicle is lifted. Lift carefully to avoid Injury or damage. Failure to follow
this warning may result in injury or death to personnel.
4.
With overhead lifting device attached to rear of vehicle, lift rear of vehicle approximately 2 ft (0.6 m).
5.
Roll tandem (8) assembly out from under vehicle.
6.
Place suitable jackstands or blocking under frame at rear of vehicle and lower vehicle. Remove overhead lifting
device.
7.
Remove airbrake hoses and brackets from rear-rear axle (13) (see TM 5-3805-254-20).
8-10