TM 5-3805-254-34
3-1.
ENGINE REPLACEMENT (Con’t).
3.
Aline engine flywheel housing (7) to front of transmission (15) and install 12 bolts (6). Torque bolts to 150 Ib.-ft,
(203 N.• m).
4.
Remove floor jack or wood cribbing supporting front of transmission (15).
5.
While rotating engine (5) to each of 12 screw (11) positions, connect flywheel (13) to engine flexplate (12) with 12
screws. Torque screws to 96-115 lb.-ft. (130-156 Nom).
6.
Install housing cover (8) to engine flywheel housing (7) with two new lockwashers (9) and screws (10).
NOTE
Perform step 7 at left and right rear engine mounts.
7.
Using overhead lifting device, position engine (5) and engine mounts (14) and install bolt, two washers, nut, and
new cotter pin (see paragraph 3-3).
NOTE
Perform step 8 at left and right front engine mount bracket.
8.
Using overhead lifting device, position front engine mount bracket to crossmember and install bolt, two washers,
and new locknut (see paragraph 3-3).
TA703649
3-6
