TM 5-3805-254-34
9-2.
INTERAXLE DIFFERENTIAL MAINTENANCE (Con’t).
3. Place an alinement mark on intermediate, forward, and rear differential assembly case (27, 36, and 38) for proper
alinement during assembly.
4.
Remove 12 bolts (25), washers (26), and nuts (35) from differential assembly (24).
5.
Remove oil scoop (34) from forward differential assembly case (36).
6.
Carefully remove forward differential assembly case (36) from intermediate differential assembly case (27).
7.
Remove forward thrustwasher (37) from forward differential assembly case (36).
8.
Remove two side gears (29), spider (30), four pinion gears (31), and fourthrustwashers (32) from rear differential
assembly case (38).
9.
Remove rear thrustwasher (28) from rear differential assembly case (38).
10.
Remove intermediate differential assembly case (27) from rear differential assembly case (38).
11.
If damaged, remove bearing (33) from input shaft (9).
TA703956
9-23
