TM 5-3805-254-34
9-2.
INTERAXLE DIFFERENTIAL MAINTENANCE.
This Task Covers:
a.
Removal
e.
Gear Set Pinion Assembly and case Assembly
b.
Interaxle Differential Assembly and Housing
f.
Interaxle Differential Assembly and Housing
Disassembly
Assembly
c.
Gear Set Pinion Assembly and Case Disassembly
g.
Installation
d.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Forward-rear axle removed (see paragraph 8-3).
•
Lubricating oil (Item 13, Appendix B)
•
Interaxle differential drained (see TM 5-3805-254-20).
•
Prussian blue paste (Item 15, Appendix B)
•
Rags (Item 17, Appendix B)
Tools/Test Equipment:
•
Dry cleaning solvent (Item 23, Appendix B)
•
General mechanic's tool kit
•
Marker tags (Item 25, Appendix B)
•
Field automotive shop set
•
Twine (Item 32, Appendix B)
References:
•
Two cotter pins
•
Three gaskets
•
TM 9-214
•
Ten lockwashers
Personnel Required: Two
General Safety Instructions:
•
Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a.
REMOVAL
1.
Remove cotter pin (2) from input shaft (9).
Discard cotter pin.
2.
Loosen, but do not remove input shaft nut (1).
NOTE
One bolt is longer than the others.
Note location of longer bolt for
Installation.
3.
Remove eight bolts (8), washers (7), and lift
differential housing (4) from case (5).
4.
Remove gasket (6) from differential housing (4).
Discard gasket.
5.
Remove power divider differential air shift
chamber (see paragraph 9-3).
TA703953
9-20
